1 day floor coatings have become a big topic in our industry. Many contractors sell these floors as a “one size fits all” solution. While these coatings may be suitable for some installations, they certainly don’t work for all customers. Like any trade, floor coatings require the proper knowledge and
A commonly asked question is how to get those nice clean lines when taping off for an epoxy floor coating. Many times the coating bleeds under the tape and leaves an unsightly transition. Check out a simple solution to make sure those tape lines are always crisp! Check us out
Check out this project we installed for one of our customers! The crew diamond ground the surface followed by repaired gaps, cracks, and pitting in the concrete. After the floor was ready to be coated we applied an industrial grade epoxy and decorative flake. Finally the floor was top coated
Check out this project we installed for one of our customers! The crew diamond ground the surface followed by repaired gaps, cracks, and pitting in the concrete. After the floor was ready to be coated we applied an industrial grade epoxy and decorative flake. Finally the floor was top coated
In this video we demonstrate how to clean an epoxy floor coating. These methods work for most situations. Some floors may require special cleaning equipment and other specialized cleaning solutions depending on the floor’s daily traffic and environment. Intro 0:00-0:30 Prep Work 0:30-1:00 Tools Used 1:00-2:08 Cleaning Demonstration 2:08-4:16 Other
There’s a number a top coats available when working with floor coatings, so why do we choose polyaspartic for most of our applications? For more info please visit http://www.columbusepoxyflooring.com
Touching more on a video we put out a couple weeks ago to further discuss CSP (Concrete surface profile). CSP is helped to determine what prep method is necessary for the floor coating being applied. For more info about our company please visit http://www.columbusepoxyflooring.com
There are many variables to watch out for and be aware of if you’re considering having either a metallic epoxy floor coating or stained concrete floor installed. METALLIC EPOXY – Temperature of the concrete and ambient air – Slope and pitch of the concrete itself – Products used – Application
See how we repaired our floor in the shop when it began to crack along where the control joints had been filled. Most of the tools needed can be found at a local hardware store. link to crack chase wheel: https://ussaws.com/product/4-5x-375-premium-concrete-blade/ link to repair material:https://floorguardproducts.com/floor-coatings/concrete-repair/ #epoxy #coatings #repair #concreterepair #garagecoatings
A local fire dept. got a new flooring upgrade. Check this video out to see how we installed their new floor. For our primer we used General Polymers (Sherwin Williams) Resuprime to make sure any potential high levels of moisture transmission would NOT fail this floor coating. Check this link
