Our resinous floor coatings offer many benefits for food and beverage facilities in areas such as bottling areas, breweries/distilleries, freezers, food processing areas, and commercial kitchens to name a few.

BENEFITS:
- Easier cleaning
- Heavy duty & durable
- Enhanced visibility
- Antimicrobial
- Custom slip resistance options
- Chemical resistant
- Seamless options
- Many aesthetic options
- Low maintenance

To find out more please visit https://columbusepoxyflooring.com/

Our resinous floor coatings offer many benefits for manufacturing facility areas such as break rooms, maintenance shops, locker rooms, manufacturing areas and loading docks to name a few.

BENEFITS:
- Easier cleaning
- Heavy duty & durable
- Enhanced visibility
- Custom slip resistance options
- Chemical resistant
- Seamless options
- Many aesthetic options
- Lower maintenance cost compared to other floors

To find out more please visit https://columbusepoxyflooring.com/

Our resinous floor coatings offer many benefits for facilities such as locker rooms, rest rooms, fire stations, break rooms, conference areas, offices, and garages to name a few.

BENEFITS:
- Easier cleaning
- Enhanced visibility
- Custom slip resistance options
- Durable
- Seamless options
- Many aesthetic options
- Lower maintenance cost compared to other floors

To find out more please visit https://columbusepoxyflooring.com/

A fantastic option we offer along with our floor installs is resinous cove base. Cove base is perfect for any area that receives a lot water and requires constant cleaning. Our cove base also makes maintaining your floor much easier and keeps your environment sanitary🧼🧼

#industrialsolutions #sanitation #foodandbeverage #flooring #seamlessdesign #FDAapproved

Step 1 - Always prep the surface using a diamond wheel to abrade the surface.
Cup wheel- https://www.homedepot.com/p/RIDGID-4-in-Diamond-Double-Row-Cup-Wheel-HD-AWD40/202884364

Step 2 - Repair any defects or damaged in the surface if needed prior to applying the coating.

Epoxy crack filler - https://columbusepoxyproducts.com/product/1-gal-epoxy-818-crack-filler/

Epoxy deep fill patch - https://columbusepoxyproducts.com/product/epoxy-343-mortar-fast-set/

Step 3 - Mix the basecoat material by following all mixing instructions. After the material is thoroughly mixed, apply the coating thick enough so the flake can soak into the material and bond to the coated surface. TIP: Gently pat the flake with your gloved hand to help the flake stick into the coating.

Polyaspartic touch up kit (Can be used for base & top coat) - https://columbusepoxyproducts.com/product/polyaspartic-touch-up-kit/

Step 4 - After the coating has cured for a minimum of 60 minutes, remove any excess flake. Then sand the flaked area with an abrasive pad or 100 grit sandpaper followed by thoroughly vacuuming the area.

Step 5 - After mixing the polyaspartic top coat, apply the material at the desired thickness over the flaked surface. NOTE: applying the top coat thicker will leave the surface smoother and glossier while a thinner coat will leave the surface with more texture.

Step 6 - Allow the coating to cure for 24 hours before returning to service

Prep & Vacuum 0:00-0:33
Mix & apply polyaspartic basecoat 0:33- 1:52
Prep the Flake 1:52-2:11
Mix & Apply Top Coat 2:11-3:06
Filler Repair 3:06-4:54
Part 2 Coating application 4:54-7:12

To purchase material please visit https://columbusepoxyproducts.com/
or email [email protected]

#howto #diy #floor #repairing #epoxyflooring #concreterepair

In this video we go over a method on how to applying our polyaspartic top coat on smaller floors. The floor we are coating is approximately 400 square feet.

It's important to always be prepared when applying these resinous coatings and thoroughly reading the data sheets to help understand the products before application.

NOTE: The top coat used in this video was our 450 polyaspartic. The Aspartic 85 SloGo LOW ODOR can also be used with similar working time as the 450 polyaspartic

Check out how we repaired the floor here: https://youtu.be/9Q3x7J9ov-g

To order the materials please visit www.columbusepoxyproducts.com

You can contact us by email at [email protected]

#garagefloor #coatings #howto #diy #homeimprovement

DISCLAIMER:
It's very important to thoroughly research the products shown. Columbus Epoxy Products warrants that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine suitability of our product for your particular purpose. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.